Skip to main content

Hollyland Lark A1 Quick-Start Guide

First-time Setup

  • Install the Holly Audio app
  • Launch the app

    image.png image.png

  • Plug the Receiver into your phone (use the orange adapter cable on iPhones with Lightning charging ports)

    image.png

  •  

    Remove the two lapel microphones from the case. The lights on the receiver and the microphones should turn green.

    image.png

  • You should now see the microphones in the Holly App. Tap on each of the mics to see the green audio meter jump and confirm they are working.

    image.png


  • Set the microphone mode to Stereo (S)

    image.png


  • The microphones should now be set up correctly for future use. You may proceed to the next section on use.

Using the Microphones 

  • If you have already set up the microphone app, just ensure that the microphone receiver has been plugged in as shown in the section above
  • Open the Holly Audio app and ensure that the microphones are detected (green lights)
  • Open your voice recorder app (or Camera if your want to record video). Your built-in voice and/or camera apps should automatically use the Hollyland microphones for sound input without additional changes.

Voice Recording/Memos

Apple iOS (iPhone)

  • Open search on your phone and search for "Voice Memos"

    image.png


  • Open the Voice Memos app
  • Press the Record (red dot) button to start recording
    • It is recommended that you first test each microphone and playback your test recording(s) to ensure that both microphones are working before recording important events/content.

      image.png

Android

Back to top